HDPE Double Station Extrusion Blow Molding Machine for Small Plastic Kid Toys
SLBU series:
1: this machine is suitable for the production of 200ML 10L plastic hollow products, the use of curved elbow lock system, low energy consumption, the center of the lock, the lock force, speed faster, run more smoothly.
2: die opening and closing system: specially designed for Heng lock mould mechanism using a high pressure mode locking, locking plate stress in the centre of the template, clamping force, openThe rigid lock template, even if the ultra wide die is also fitted.
3: die head system: all the use of 38CRMOALA and other materials, the precision machining and heat treatment.
4: hydraulic system: full hydraulic double proportional hydraulic control, equipped with imported famous brand hydraulic valve and oil pump, stable, reliable.WIth toggle balance clamping system for high accuracy and excellent clamping force.
5.Position control: This is the positioning control, including absolute and relative positioning control.It can be single shaft axis positioning
control.Such as servo motor, fixed, the interaction of several axis machining center can be controlled by a system for positioning.
6 Sequence control: When finish this step then go to the next step, some equipment is very strict with the process steps
7 Data processing: Make analysis and judgment based on the data.
| SPECIFICATION | SLBU-80 |
| MATERIAL | | PE,PP,EVA,ABS,PS |
| MAX CONTAINER CAPACITY | L | 10 |
| NUMBER OF DIE HEAD | SET | 1,2,3,4,6,8 |
| OUPUT(DRY CYCLE) | PC/HR | 950x2 |
| MACHINE DIMENSION (LxWxH ) | MM | 4600x2600x2600 |
| TOTAL WEIGHT | TON | 7.5T |
| CLAMPING UNIT | |
| CLAMPING FORCE | KN | 86 |
| PLATEN OPENING STROKE | MM | 300-600 |
| PLATEN SIZE(WxH) | MM | 450x450 |
| MAX MOULD SIZE(WxH) | MM | 500x450 |
| MOLD THICKNESS | MM | 305-400 |
| EXTRUDER UNIT | |
| SCREW DIAMETER | MM | 80 |
| SCREW L/D RATIO | L/D | 25 |
| MELTING CAPACITY | KG/HR | 120 |
| BARREL HEATING POWER | KW | 20 |
| NUMBER OF HEATING ZONE | ZONE | 3 |
| EXTRUDER MOTOR RATED POWER | KW | 30 |
| DIE HEAD | |
| NUMBER OF DIE HEATING ZONE | ZONE | 2-5 |
| POWER OF DIE HEATING | KW | 6 |
| CENTER DISTANCE OF DOUBLE DIE | MM | 160 |
| CENTER DISTANCE OF THREE DIE | MM | 110 |
| CENTER DISTANCE OF FOUR DIE | MM | 100 |
| CENTER DISTANCE OF SIX DIE | MM | 80 |
| MAX DIE-PIN DIAMETER | MM | 260 |
| POWER | |
| MAX DRIVE POWER | KW | 35 |
| TOTAL POWER | KW | 82 |
| FAN POWER OF SCREW | KW | 3.2 |
| AIR PRESSURE | MPA | 0.6 |
| AIR CONSUMPTION | M3/MIN | 0.5 |
| AVERAGE ENERGY CONSUMPTION | KW | 22 |
Product Tags:
|
|
U Type Blow Moulding Machine For Plastic Bottle Images
|
