One Head One Layer Double Station Blow Molding Machine for Plastic Big Mouth Bottle SLX-65
LX series:
1: This machine is suitable for PP, PE, EVA, PS, ABS, TPR, TPV and other raw materials such as blow molding.
2: SLX series are Shuangli company pioneered the gas -liquid combination of new type blow moulding machine, superior performance,
stable operation, simple operation, affordable andCharacteristic
3: Placement of the blow moulder
When placing the machine, in order to facilitate the operation and maintenance of the machine, please leave enough room in front of and behind
the machine and on both sides of the machine. If the machine is aligned with other machines, there should be enough room between the two to
facilitate the replacement of molds and placement of auxiliary equipment.
4.Horizontal Adjustment
Please use a gradient to adjust after setting up the machine. The gradienter should be on the linear guide of the closing device and use
adjustment bolt to adjust the chassis. The purpose of horizontal adjustment is to avoid a significant distortion in the machine and to extend the
service life of the blow moulder.
| SPECIFICATION | SLX-65 |
| MATERIAL | | PE,PP,EVA,ABS,PS |
| MAX CONTAINER CAPACITY | L | 5 |
| NUMBER OF DIE HEAD | SET | 1,2,3,4,6 |
| OUPUT(DRY CYCLE) | PC/HR | 950x2 |
| MACHINE DIMENSION (LxWxH ) | MM | 3800x1800x2600 |
| TOTAL WEIGHT | TON | 3.8T |
| CLAMPING UNIT | |
| CLAMPING FORCE | KN | 65 |
| PLATEN OPENING STROKE | MM | 170-520 |
| PLATEN SIZE(WxH) | MM | 450x400 |
| MAX MOULD SIZE(WxH) | MM | 330x500 |
| MOLD THICKNESS | MM | 175-250 |
| EXTRUDER UNIT | |
| SCREW DIAMETER | MM | 65 |
| SCREW L/D RATIO | L/D | 25 |
| MELTING CAPACITY | KG/HR | 70 |
| BARREL HEATING POWER | KW | 15 |
| NUMBER OF HEATING ZONE | ZONE | 3 |
| EXTRUDER MOTOR RATED POWER | KW | 11(15) |
| DIE HEAD | |
| NUMBER OF DIE HEATING ZONE | ZONE | 2-5 |
| POWER OF DIE HEATING | KW | 6 |
| CENTER DISTANCE OF DOUBLE DIE | MM | 130 |
| CENTER DISTANCE OF THREE DIE | MM | 80 |
| CENTER DISTANCE OF FOUR DIE | MM | 60 |
| CENTER DISTANCE OF SIX DIE | MM | 60 |
| MAX DIE-PIN DIAMETER | MM | 260 |
| POWER | |
| MAX DRIVE POWER | KW | 26 |
| TOTAL POWER | KW | 32 |
| FAN POWER OF SCREW | KW | 0.42 |
| AIR PRESSURE | MPA | 0.6 |
| AIR CONSUMPTION | M3/MIN | 0.5 |
| AVERAGE ENERGY CONSUMPTION | KW | 13 |
Product Tags:
|
|
Horizontal PP Blow Moulding Machine 2 Layer 1 Head Jar Moulding Images
|
