D Type High Speed Single Station Plastic Bottle Blow Molding Machine with IML for 3 Heads Plastic Yoghurt Bottle
SLD series:
1: this machine is suitable for the production of 200ML 10L plastic hollow products, the use of curved elbow lock system, low energy consumption, the center of the lock, the lock force, speedF aster, run more smoothly.
2: die head system: all the use of 38CRMOALA and other materials, the precision machining and heat treatment.die opening and closing system: specially designed for Heng lock mould mechanism using a high pressure mode locking, locking plate stress in the centre of the template, clamping force, openThe rigid lock template, even if the ultra wide die is also fitted.
3: Stay in two-step blow molding, blow molding materials in blow molding machine type WLK consolidated uniaxial by blow molding into 40 mm range of particles, and then use the NZ follow-up times in blow molding machine were blowing as about 3 ~ 10 mm at the end of the grain, which is especially for information about pre blow molding of secondary blowing describe.
In order to prevent blow molding machine appear problem, need to continue to be proper feeding crusher, and these requirements through manual operation is usually difficult to ensure. Once feed excess, generally causes uneven blow molding, seizures, and with a high noise of the attack, the results is that material accumulation or are damaged material weaken its heat because of the conflict. In addition, information about trouble sex of higher sensitivity, as well as the formation of frequent replacement blades
| SPECIFICATION | SLD-75 |
| MATERIAL | | PE,PP,EVA,ABS,PS |
| MAX CONTAINER CAPACITY | L | 10 |
| NUMBER OF DIE HEAD | SET | 1,2,3,4,6 |
| OUPUT(DRY CYCLE) | PC/HR | 600 |
| MACHINE DIMENSION (LxWxH ) | MM | 4300x2400x2200 |
| TOTAL WEIGHT | TON | 7.5T |
| CLAMPING UNIT | |
| CLAMPING FORCE | KN | 65 |
| PLATEN OPENING STROKE | MM | 220-530 |
| PLATEN SIZE(WxH) | MM | 320x350 |
| MAX MOULD SIZE(WxH) | MM | 400x350 |
| MOLD THICKNESS | MM | 225-320 |
| EXTRUDER UNIT | |
| SCREW DIAMETER | MM | 75 |
| SCREW L/D RATIO | L/D | 25 |
| MELTING CAPACITY | KG/HR | 95 |
| BARREL HEATING POWER | KW | 20 |
| NUMBER OF HEATING ZONE | ZONE | 4 |
| EXTRUDER MOTOR RATED POWER | KW | 22 |
| DIE HEAD | |
| NUMBER OF DIE HEATING ZONE | ZONE | 2-5 |
| POWER OF DIE HEATING | KW | 8 |
| CENTER DISTANCE OF DOUBLE DIE | MM | 130 |
| CENTER DISTANCE OF THREE DIE | MM | 110 |
| CENTER DISTANCE OF FOUR DIE | MM | 100 |
| CENTER DISTANCE OF SIX DIE | MM | 80 |
| MAX DIE-PIN DIAMETER | MM | 200 |
| POWER | |
| MAX DRIVE POWER | KW | 24 |
| TOTAL POWER | KW | 62 |
| FAN POWER OF SCREW | KW | 3.6 |
| AIR PRESSURE | MPA | 0.6 |
| AIR CONSUMPTION | M3/MIN | 0.5 |
| AVERAGE ENERGY CONSUMPTION | KW | 22 |
Product Tags:
|
|
Yoghurt Plastic Bottle Blow Molding Machine 3 Head , 10L Single Stage PE Bottle Machine Images
|
