HDPE Double Station Extrusion Blow Molding Machine for Multi-Layer Plastic Chemical Bottles
SLBU series:
1: this machine is suitable for the production of 200ML 10L plastic hollow products, the use of curved elbow lock system, low energy consumption, the center of the lock, the lock force, speedF aster, run more smoothly.
2: die opening and closing system: specially designed for Heng lock mould mechanism using a high pressure mode locking, locking plate stress in the centre of the template, clamping force, openThe rigid lock template, even if the ultra wide die is also fitted.
3:Blow Molding Machinery and Equipment daily check and maintenance:
(1)Check if there is strange noise in the oil pump and pipe of the motor
(2)Check the oil temperature. Several hours after the machine starts running, the oil temperature ranges from 30℃-50℃. If the oil temperature exceeds 60℃, please stop the machine and cool it down.
(3)Check if the system pressure is normal.
(4)Check the oil amount of the central lubrication system. If necessary, please fill lubricant.
Check if there is trouble in the safety light screen of the clamping area (refer to the user’s manual for details). In case there is, please don’t start the machine.
| SPECIFICATION | SLBU-80 |
| MATERIAL | | PE,PP,EVA,ABS,PS |
| MAX CONTAINER CAPACITY | L | 10 |
| NUMBER OF DIE HEAD | SET | 1,2,3,4,6,8 |
| OUPUT(DRY CYCLE) | PC/HR | 950x2 |
| MACHINE DIMENSION (LxWxH ) | MM | 4600x2600x2600 |
| TOTAL WEIGHT | TON | 7.5T |
| CLAMPING UNIT | |
| CLAMPING FORCE | KN | 86 |
| PLATEN OPENING STROKE | MM | 300-600 |
| PLATEN SIZE(WxH) | MM | 450x450 |
| MAX MOULD SIZE(WxH) | MM | 500x450 |
| MOLD THICKNESS | MM | 305-400 |
| EXTRUDER UNIT | |
| SCREW DIAMETER | MM | 80 |
| SCREW L/D RATIO | L/D | 25 |
| MELTING CAPACITY | KG/HR | 120 |
| BARREL HEATING POWER | KW | 20 |
| NUMBER OF HEATING ZONE | ZONE | 3 |
| EXTRUDER MOTOR RATED POWER | KW | 30 |
| DIE HEAD | |
| NUMBER OF DIE HEATING ZONE | ZONE | 2-5 |
| POWER OF DIE HEATING | KW | 6 |
| CENTER DISTANCE OF DOUBLE DIE | MM | 160 |
| CENTER DISTANCE OF THREE DIE | MM | 110 |
| CENTER DISTANCE OF FOUR DIE | MM | 100 |
| CENTER DISTANCE OF SIX DIE | MM | 80 |
| MAX DIE-PIN DIAMETER | MM | 260 |
| POWER | |
| MAX DRIVE POWER | KW | 35 |
| TOTAL POWER | KW | 82 |
| FAN POWER OF SCREW | KW | 3.2 |
| AIR PRESSURE | MPA | 0.6 |
| AIR CONSUMPTION | M3/MIN | 0.5 |
| AVERAGE ENERGY CONSUMPTION | KW | 22 |
Product Tags:
|
|
Multi Layer HDPE Blow Moulding Machine Chemical Bottle Blower Machine 10L Bottle Images
|
